Disclaimer

Trademark Disclaimer:
"Fadal" is a registered trademark of Fadal Engineering llc.
NXGEN CNC, FadalParts.net, and our affiliates have no affiliation what so ever, stated or implied, with Fadal Engineering llc and is not authorized by, associated with or sponsored by Fadal.

Product names, logos, brands, and other trademarks featured or referred to within the www.fadalparts.net website are the property of their respective trademark holders. The display of such images in no way implies association with or endorsed by the respective trademark holders.

Software Policy:
We do not sell or distribute Fadal copyrighted software. Boards such as the 1400 CPU board and the 1010 Axis controller board requires Fadal copyrighted software. It is best to retain and use your original Eproms and avoid introducing software compatibility issues. Ask your supplier if they are a Fadal authorized supplier for authentic Eproms and always try to use the same software versions when possible. Beware, there are many companies selling illegal counterfeit copies that could cause even more problems. When replacing eproms, get a receipt and keep your originals just in case.

Fadal Machine Replacement Parts:

Our new parts are genuine, they are not from Fadal and do not have the Fadal logo or part number on them.
They are built with the same quality and performance specifications by the Original Equipment Manufacture (OEM)
Manufactures such as but not limited to:

AMC - Advanced Motion Controls
3805 Calle Tecate
Camarillo, CA 93012 USA
Tel: 805.389.1935

Baldor - Baldor Electric Company Corporate
Headquarters 5711 R.S. Boreham, Jr. St.
Fort Smith, AR 72901
Phone: (479) 646-4711

Glentek - Glentek, Inc.
208 Standard Street El Segundo, CA 90245, USA
Phone: (310) 322-3026

Site Usage:

No advice - This website contains general information about service matters. The information is not advice, and should not be treated as such.
Use of the information and data contained on this WWW site on these pages is at your sole risk.
If you rely on the information on this Site you are responsible for ensuring by independent verification its accuracy or completeness.
The information and data on this Site is subject to change without notice. The company may revise this Disclaimer at any time by updating this posting.
NXGEN CNC, its agents, instrumentalities, officers and employees :
1. make no representations, express or implied, as to the accuracy of the information and data contained on this Site;
2. accept no liability for any use of the said information and data or reliance placed on it
3. make no representations, either expressed or implied, as to the suitability of the said information and data for any particular purpose;
4. make no warranties that the said information and data is free of infection by computer viruses or other contamination;
5. do not sponsor, endorse or necessarily approve of any material on sites linked from or to this Site;
6. do not make any warranties or representations regarding the quality, accuracy, merchantability or fitness for purpose of any material on sites linked from or to this Site;
7. do not make any warranties or representations that material on other web sites to which this site is linked does not infringe the intellectual property rights of any person anywhere in the world; and
8. do not authorize the infringement of any intellectual property rights contained in material in other sites by linking this Site to those other sites.

Subject to change without notice

Shop by Category

Shop by Brand

Disclaimer